必赢56net在线登录
DongGuan cnauto automation equipment Co Ltd
总监在线
13713306830
news
position:home > news

Silicone-coated graphics cards need to be used together with

writer:点胶设备 time:2019-06-05 11:52 clicks:
In fact, the function of CPU coated silica gel is the same as that of silicone coated graphics card. In order to make the thermal conductive silica gel play the role of thermal conductivity to heat sink, it is necessary to use this high viscosity thermal conductive gel as thermal conductivity to radiate heat sink. How to coat the silica gel used for thermal conductivity? Silicone pressure barrel can be used to store a variety of high-viscosity silica gel fluids for coating, including liquid silica gel yellow silica gel and even special coated silica gel. The amount of silica gel required for uniform coating of graphics cards can be satisfied by continuous and stable supply of silica gel pressure barrel. Of course, it is equally important to know how to coat silica gel.
 
Thermal Conductivity of Graphic Card Coated with Silica Gel
 
Improving Thermal Conductivity by Proper Silica Gel Coating
 
 显卡涂硅胶导热
Display cards need to be coated with a certain amount of silica gel for heat conduction and heat dissipation to enhance the safety effect. In fact, the application of CPU coated silica gel is similar. In order to make the radiator contact closely with the display card and CPU to achieve heat dissipation, it is necessary to remove the fan and radiator of the display card, scrape the residual silica gel from the display card or radiator with a blade, and the thermal conductivity of the metal sheet is higher than that of silica gel or coated silica gel. Because of its high capability, silica gel is coated on the contacts of radiators at the external end of the display card to promote thermal conductivity. Silica pressure barrels are used to store a variety of different types of fluid gels for coating. How to coat silica gel is briefly introduced below.
 
Thermal conductive silica gel silica grease
 
 导热硅胶硅脂
Method of Silica Gel Coating
 
Here is a brief description of how to coat the silica gel and how to pay attention to it. The personal computer graphics card needs to coat part of the silica gel to promote thermal conductivity. First, remove the radiator and remove the dirty hair or residual silica grease that may adhere to it, and coat the silica gel on the contact gap between the radiator and the graphics card with a layer of silica gel. Although the silica gel pressure bucket can set parameters to control the flow rate, it is still recommended to coat thin. A layer of silica gel is enough. If it is coated too much, it will affect the thermal conductivity. If it is to be supplied quantitatively with special coated silica gel, it can also be coated with this pressure barrel.
 
 碳钢硅胶压力桶
Carbon steel silicone pressure barrel
 
Choosing the way of silica gel coated graphics card can improve the application life greatly, and the same quality assurance as CPU coated silica gel can improve the stable use of personal computers better.
XML 地图 | Sitemap 地图